Skip to content
ryhanah
Back to the product

Assembly guide

HAWA Console table

Wall-hung console 120×35 with drawer · 1200 × 350 × 200 mm · Item number hawa-console-120

Before you start

  • About 1 h 30
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

CDEONJABLMFGHIK ×2
Ref.PartSize (mm)Qty
ASide panel left330 × 200 × 181
BSide panel right330 × 200 × 181
CTop panel1164 × 330 × 181
DBottom panel1164 × 330 × 181
EBack panel1178 × 178 × 31
FDivider 1 (left half)299 × 164 × 181
GDivider 1 (right half)299 × 164 × 181
HDivider 2 (left half)299 × 164 × 181
IDivider 2 (right half)299 × 164 × 181
JDrawer front483 × 198 × 181
KDrawer side250 × 148 × 182
LDrawer sub-front389 × 148 × 181
MDrawer back389 × 134 × 181
NDrawer bottom403 × 239 × 31
OHanging rail (screwed to the wall)1164 × 80 × 181

Hardware

All supplied, in bags.

  • ×1Ball-bearing drawer slides, 45 mm, full extension, push-to-open (tip-on) (pair)
  • ×10Beech dowel Ø8×35, fluted
  • ×12Chipboard screw 4×30, countersunk
  • ×3Frame fixing screw 6×100 + plug
  • ×26Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×26Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    CDEONJABLMFGHIK ×2

    Hardware

    • ×10 Beech dowel Ø8×35
    • ×12 Chipboard screw 4×30
    • ×26 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    CDEONJABLMFGHIK ×2
  4. 4

    Step 4

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    CDEONJABLMFGHIK ×2

    Hardware

    • ×1 Ball-bearing drawer slides
  5. 5

    Step 5

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×3 Frame fixing screw 6×100 + plug
  6. 6

    Step 6

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×26 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp