Skip to content
ryhanah
Back to the product

Assembly guide

HAWA Display cabinet

Display cabinet 90×180, door + 2 drawers · 900 × 350 × 1800 mm · Item number hawa-display-90

Before you start

  • About 2 h 30
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

EABFGCJDK ×2H ×2I ×5PQO ×2M ×2N ×2L ×4RS
Ref.PartSize (mm)Qty
ASide panel left1700 × 330 × 181
BSide panel right1700 × 330 × 181
CTop panel864 × 330 × 181
DBottom panel (drilled face down)864 × 319 × 181
EBack panel1688 × 878 × 31
FDivider 1 (left half)1664 × 317 × 181
GDivider 1 (right half)1664 × 317 × 181
HFixed shelf414 × 317 × 182
IAdjustable shelf412 × 307 × 185
JDoor left-hinged625 × 448 × 181
KDrawer front448 × 311 × 182
LDrawer side300 × 220 × 184
MDrawer sub-front353 × 220 × 182
NDrawer back353 × 206 × 182
ODrawer bottom367 × 289 × 32
PBase frame front (set 90 in)720 × 100 × 181
QBase frame back720 × 100 × 181
RBase frame side left184 × 100 × 181
SBase frame side right184 × 100 × 181

Hardware

All supplied, in bags.

  • ×20Shelf pin Ø5, nickel
  • ×2Cup hinge Ø35, 110°, free-swinging (no soft-close, for push-to-open), full overlay, with clip plate
  • ×4Euro screw 6.3×13 (hinge plates)
  • ×6Chipboard screw 3.5×16, pan head
  • ×1Push-to-open latch, magnetic
  • ×2Ball-bearing drawer slides, 45 mm, full extension, push-to-open (tip-on) (pair)
  • ×16Beech dowel Ø8×35, fluted
  • ×39Chipboard screw 4×30, countersunk
  • ×4Felt pad Ø28
  • ×24Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×24Cam cover cap Ø15, matching colour
  • ×1Anti-tip wall strap kit (EN 16122)

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    EABFGCJDK ×2H ×2I ×5PQO ×2M ×2N ×2L ×4RS

    Hardware

    • ×16 Beech dowel Ø8×35
    • ×39 Chipboard screw 4×30
    • ×24 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    EABFGCJDK ×2H ×2I ×5PQO ×2M ×2N ×2L ×4RS
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    EABFGCJDK ×2H ×2I ×5PQO ×2M ×2N ×2L ×4RS

    Hardware

    • ×6 Chipboard screw 3.5×16
  5. 5

    Step 5

    Place the shelves

    Push the shelf pins in at the height you want and lay the shelves on them.

    Parts

    EABFGCJDK ×2H ×2I ×5PQO ×2M ×2N ×2L ×4RS

    Hardware

    • ×20 Shelf pin Ø5
  6. 6

    Step 6

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    EABFGCJDK ×2H ×2I ×5PQO ×2M ×2N ×2L ×4RS

    Hardware

    • ×2 Ball-bearing drawer slides
  7. 7

    Step 7

    Hang the doors

    Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.

    Parts

    EABFGCJDK ×2H ×2I ×5PQO ×2M ×2N ×2L ×4RS

    Hardware

    • ×2 Cup hinge Ø35
    • ×4 Euro screw 6.3×13 (hinge plates)
    • ×1 Push-to-open latch
  8. 8

    Step 8

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  9. 9

    Step 9

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×24 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp