Assembly guide
RIF Kitchen shelf
Kitchen wall shelf 80 with utensil rail · 800 × 250 × 400 mm · Item number rif-kitchen-shelf-80
Before you start
- About 45 min
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Cheek left | 382 × 250 × 18 | 1 |
| B | Cheek right | 382 × 250 × 18 | 1 |
| C | Top shelf | 800 × 250 × 18 | 1 |
| D | Lower shelf | 764 × 250 × 18 | 1 |
| E | Backsplash board | 764 × 82 × 18 | 1 |
| F | Back panel (between the shelves) | 764 × 282 × 18 | 1 |
Hardware
All supplied, in bags.
- ×14Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×14Cam cover cap Ø15, matching colour
- ×10Beech dowel Ø8×35, fluted
- ×1Kitchen rail Ø16, matt black steel, cut to length, 2 end supports + 5 S-hooks
- ×4Chipboard screw 3.5×16, pan head
- ×4Frame fixing screw 6×100 + plug
- ×4Snap-on screw cover cap with washer, matching colour
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 4
Fit the rail
Screw on the supports and clip the rail in.
Hardware
- 5
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 6
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.