Assembly guide
RIF Mirror
Wall mirror 60×160 · 600 × 21 × 1600 mm · Item number rif-mirror-60x160
Before you start
- About 45 min
- Two people needed
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Back panel (clamps the glass) | 1596 × 596 × 3 | 1 |
| B | Frame stile left (fluted) | 1600 × 90 × 18 | 1 |
| C | Frame stile right (fluted) | 1600 × 90 × 18 | 1 |
| D | Frame rail top | 420 × 90 × 18 | 1 |
| E | Frame rail bottom | 420 × 90 × 18 | 1 |
Hardware
All supplied, in bags.
- ×8Beech dowel Ø8×35, fluted
- ×16Chipboard screw 3.5×16, pan head
- ×1Mirror glass 4 mm, 438×1438 mm, polished edges, safety film backing
- ×1Flat steel mirror hanger pair (25 kg each) with screws, wall screws and plugs
- ×2Felt pad Ø28
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 4
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 5
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.