Skip to content
ryhanah
Back to the product

Assembly guide

HAWA Bedside table

Bedside table, 2 drawers · 420 × 400 × 400 mm · Item number hawa-bedside-2-drawers

Before you start

  • About 1 h 30
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABECDJ ×2F ×2LHK ×2MG ×2IN
Ref.PartSize (mm)Qty
ASide panel left400 × 380 × 181
BSide panel right400 × 380 × 181
CTop panel384 × 380 × 181
DBottom panel384 × 380 × 181
EBack panel398 × 378 × 31
FDrawer front418 × 198 × 182
GDrawer side300 × 148 × 182
HDrawer sub-front323 × 148 × 181
IDrawer back323 × 134 × 181
JDrawer bottom337 × 289 × 32
KDrawer side300 × 153 × 182
LDrawer sub-front323 × 153 × 181
MDrawer back323 × 139 × 181
NHanging rail (screwed to the wall)384 × 80 × 181

Hardware

All supplied, in bags.

  • ×2Ball-bearing drawer slides, 45 mm, full extension, push-to-open (tip-on) (pair)
  • ×14Beech dowel Ø8×35, fluted
  • ×24Chipboard screw 4×30, countersunk
  • ×2Frame fixing screw 6×100 + plug
  • ×10Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×10Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABECDJ ×2F ×2LHK ×2MG ×2IN

    Hardware

    • ×14 Beech dowel Ø8×35
    • ×24 Chipboard screw 4×30
    • ×10 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ABECDJ ×2F ×2LHK ×2MG ×2IN
  4. 4

    Step 4

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ABECDJ ×2F ×2LHK ×2MG ×2IN

    Hardware

    • ×2 Ball-bearing drawer slides
  5. 5

    Step 5

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×2 Frame fixing screw 6×100 + plug
  6. 6

    Step 6

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×10 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp