Skip to content
ryhanah
Back to the product

Assembly guide

HAWA Bathroom cabinet

Bathroom wall cabinet 80, 2 doors · 800 × 200 × 700 mm · Item number hawa-bath-wall-cabinet-80

Before you start

  • About 1 h 15
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

EIJCDABFGKH ×4
Ref.PartSize (mm)Qty
ASide panel left700 × 180 × 181
BSide panel right700 × 180 × 181
CTop panel764 × 180 × 181
DBottom panel764 × 180 × 181
EBack panel778 × 678 × 31
FDivider 1 (left half)664 × 149 × 181
GDivider 1 (right half)664 × 149 × 181
HAdjustable shelf362 × 139 × 184
IDoor left-hinged698 × 398 × 181
JDoor right-hinged698 × 398 × 181
KHanging rail (screwed to the wall)764 × 80 × 181

Hardware

All supplied, in bags.

  • ×16Shelf pin Ø5, nickel
  • ×4Cup hinge Ø35, 110°, free-swinging (no soft-close, for push-to-open), full overlay, with clip plate
  • ×8Euro screw 6.3×13 (hinge plates)
  • ×12Chipboard screw 3.5×16, pan head
  • ×2Push-to-open latch, magnetic
  • ×3Frame fixing screw 6×100 + plug
  • ×18Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×18Cam cover cap Ø15, matching colour
  • ×6Beech dowel Ø8×35, fluted

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    EIJCDABFGKH ×4

    Hardware

    • ×18 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×6 Beech dowel Ø8×35
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    EIJCDABFGKH ×4

    Hardware

    • ×12 Chipboard screw 3.5×16
  4. 4

    Step 4

    Place the shelves

    Push the shelf pins in at the height you want and lay the shelves on them.

    Parts

    EIJCDABFGKH ×4

    Hardware

    • ×16 Shelf pin Ø5
  5. 5

    Step 5

    Hang the doors

    Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.

    Parts

    EIJCDABFGKH ×4

    Hardware

    • ×4 Cup hinge Ø35
    • ×8 Euro screw 6.3×13 (hinge plates)
    • ×2 Push-to-open latch
  6. 6

    Step 6

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×3 Frame fixing screw 6×100 + plug
  7. 7

    Step 7

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×18 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp