Assembly guide
HAWA Bed
Bed 180×200 · 1856 × 2056 × 950 mm · Item number hawa-bed-180
Before you start
- About 1 h 45
- Two people needed
- 4 packages
Tools
- Cross-head screwdriver
- Allen key (supplied)
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Headboard | 1856 × 950 × 18 | 1 |
| B | Side rail left | 2038 × 205 × 18 | 1 |
| C | Side rail right | 2038 × 205 × 18 | 1 |
| D | Foot rail | 1820 × 205 × 18 | 1 |
| E | Centre beam | 2020 × 267 × 18 | 1 |
| F | Support beam (dark, set 200 mm in) | 2020 × 267 × 18 | 2 |
| G | Deck cleat, left rail | 1880 × 60 × 18 | 1 |
| H | Deck cleat, right rail | 1880 × 60 × 18 | 1 |
| I | Deck cleat, beam left | 1880 × 60 × 18 | 1 |
| J | Deck cleat, beam right | 1880 × 60 × 18 | 1 |
| K | Platform panel (ventilated) | 899 × 504 × 18 | 8 |
Hardware
All supplied, in bags.
- ×4Steel angle bracket 30×30×15
- ×16Chipboard screw 3.5×16, pan head
- ×4Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
- ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×16Cam cover cap Ø15, matching colour
- ×10Beech dowel Ø8×35, fluted
- ×24Chipboard screw 4×30, countersunk
- ×8Felt pad Ø28
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.