Skip to content
ryhanah
Back to the product

Assembly guide

HAWA Desk

Desk 140×60 with drawer unit · 1400 × 600 × 750 mm · Item number hawa-desk-140-unit

Before you start

  • About 2 h 30
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABCDFGJHIEO ×3K ×3P ×4L ×2Q ×2MNR ×2UVST
Ref.PartSize (mm)Qty
ADesk top1400 × 600 × 181
BLeg left (dark)732 × 500 × 181
CLeg right (dark)732 × 500 × 181
DModesty panel (dark)1164 × 300 × 181
ETop stiffening rail (dark)1164 × 80 × 181
FSide panel left500 × 430 × 181
GSide panel right500 × 430 × 181
HTop panel430 × 364 × 181
IBottom panel (drilled face down)419 × 364 × 181
JBack panel488 × 378 × 31
KDrawer front398 × 164 × 183
LDrawer side400 × 114 × 182
MDrawer sub-front303 × 114 × 181
NDrawer back303 × 100 × 181
ODrawer bottom389 × 317 × 33
PDrawer side400 × 119 × 184
QDrawer sub-front303 × 119 × 182
RDrawer back303 × 105 × 182
SBase frame front (set 90 in)220 × 100 × 181
TBase frame back220 × 100 × 181
UBase frame side left284 × 100 × 181
VBase frame side right284 × 100 × 181

Hardware

All supplied, in bags.

  • ×3Ball-bearing drawer slides, 45 mm, full extension, push-to-open (tip-on) (pair)
  • ×24Beech dowel Ø8×35, fluted
  • ×45Chipboard screw 4×30, countersunk
  • ×8Felt pad Ø28
  • ×28Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×28Cam cover cap Ø15, matching colour
  • ×1Anti-tip wall strap kit (EN 16122)
  • ×1Cable grommet Ø60

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABCDFGJHIEO ×3K ×3P ×4L ×2Q ×2MNR ×2UVST

    Hardware

    • ×24 Beech dowel Ø8×35
    • ×45 Chipboard screw 4×30
    • ×28 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    ABCDFGJHIEO ×3K ×3P ×4L ×2Q ×2MNR ×2UVST
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ABCDFGJHIEO ×3K ×3P ×4L ×2Q ×2MNR ×2UVST
  5. 5

    Step 5

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Parts

    ABCDFGJHIEO ×3K ×3P ×4L ×2Q ×2MNR ×2UVST
  6. 6

    Step 6

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ABCDFGJHIEO ×3K ×3P ×4L ×2Q ×2MNR ×2UVST

    Hardware

    • ×3 Ball-bearing drawer slides
  7. 7

    Step 7

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  8. 8

    Step 8

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×8 Felt pad Ø28
    • ×28 Cam cover cap Ø15
    • ×1 Cable grommet Ø60

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp