Skip to content
ryhanah
Back to the product

Assembly guide

HAWA Dining table

Dining table 160×90, 6 seats · 1600 × 900 × 750 mm · Item number hawa-dining-table-160

Before you start

  • About 1 h 15
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

AE ×2F ×2B ×2GHC ×2D ×3
Ref.PartSize (mm)Qty
ATable top1600 × 900 × 181
BTop doubling strip, long1600 × 100 × 182
CTop doubling strip, short700 × 100 × 182
DTop stiffening strip, centre700 × 100 × 183
ETrestle leg, outer board (dark)720 × 714 × 182
FTrestle leg, inner board (dark)720 × 714 × 182
GBeam under the top (dark)1048 × 150 × 181
HFloor stretcher (dark)1048 × 100 × 181

Hardware

All supplied, in bags.

  • ×8Felt pad Ø28
  • ×13Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×13Cam cover cap Ø15, matching colour
  • ×10Beech dowel Ø8×35, fluted
  • ×41Chipboard screw 4×30, countersunk

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    AE ×2F ×2B ×2GHC ×2D ×3

    Hardware

    • ×13 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×10 Beech dowel Ø8×35
    • ×41 Chipboard screw 4×30
  3. 3

    Step 3

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Parts

    AE ×2F ×2B ×2GHC ×2D ×3
  4. 4

    Step 4

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×8 Felt pad Ø28
    • ×13 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp