Assembly guide
HAWA Kitchen island
Kitchen island 100×60 · 1000 × 600 × 900 mm · Item number hawa-kitchen-island-100
Before you start
- About 1 h 15
- Two people needed
- 2 packages
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel left | 782 × 520 × 18 | 1 |
| B | Side panel right | 782 × 520 × 18 | 1 |
| C | Top panel | 884 × 520 × 18 | 1 |
| D | Bottom panel (drilled face down) | 884 × 509 × 18 | 1 |
| E | Back panel | 898 × 770 × 3 | 1 |
| F | Divider 1 (left half) | 746 × 507 × 18 | 1 |
| G | Divider 1 (right half) | 746 × 507 × 18 | 1 |
| H | Fixed shelf | 507 × 424 × 18 | 2 |
| I | Base frame front (set 90 in) | 740 × 100 × 18 | 1 |
| J | Base frame back | 740 × 100 × 18 | 1 |
| K | Base frame side left | 374 × 100 × 18 | 1 |
| L | Base frame side right | 374 × 100 × 18 | 1 |
| M | Worktop | 1000 × 600 × 18 | 1 |
Hardware
All supplied, in bags.
- ×4Felt pad Ø28
- ×24Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×24Cam cover cap Ø15, matching colour
- ×8Beech dowel Ø8×35, fluted
- ×21Chipboard screw 4×30, countersunk
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the base
Screw the base under the frame, lining up its edges before tightening.
Parts
- 4
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
- 5
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.