Assembly guide
HAWA TV bench
TV bench 200, wall-hung, 4 flaps + open niche · 2000 × 400 × 300 mm · Item number hawa-tv-bench-200
Before you start
- About 1 h 30
- Two people needed
- 2 packages
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel left | 380 × 300 × 18 | 1 |
| B | Side panel right | 380 × 300 × 18 | 1 |
| C | Top panel | 1964 × 380 × 18 | 1 |
| D | Bottom panel | 1964 × 380 × 18 | 1 |
| E | Back panel | 1978 × 278 × 3 | 1 |
| F | Divider 1 (left half) | 349 × 264 × 18 | 1 |
| G | Divider 1 (right half) | 349 × 264 × 18 | 1 |
| H | Divider 2 (left half) | 349 × 264 × 18 | 1 |
| I | Divider 2 (right half) | 349 × 264 × 18 | 1 |
| J | Divider 3 (left half) | 349 × 264 × 18 | 1 |
| K | Divider 3 (right half) | 349 × 264 × 18 | 1 |
| L | Divider 4 (left half) | 349 × 264 × 18 | 1 |
| M | Divider 4 (right half) | 349 × 264 × 18 | 1 |
| N | Drop-down flap | 374 × 298 × 18 | 2 |
| O | Drop-down flap | 373 × 298 × 18 | 2 |
| P | Hanging rail (screwed to the wall) | 1964 × 80 × 18 | 1 |
Hardware
All supplied, in bags.
- ×4Push-to-open latch, magnetic
- ×40Chipboard screw 3.5×16, pan head
- ×4Flap / tilt door hinge pair with stay
- ×16Euro screw 6.3×13 (hinge plates)
- ×5Frame fixing screw 6×100 + plug
- ×42Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×42Cam cover cap Ø15, matching colour
- ×6Beech dowel Ø8×35, fluted
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 4
Hang the doors
Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.
Parts
Hardware
- 5
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 6
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.