Assembly guide
HAWA Under-bed storage
Long under-bed drawer on castors 120×60 · 1200 × 600 × 225 mm · Item number hawa-underbed-drawer-120x60
Before you start
- About 45 min
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Bottom (drilled face down) | 1200 × 582 × 18 | 1 |
| B | Side left | 582 × 172 × 18 | 1 |
| C | Side right | 582 × 172 × 18 | 1 |
| D | Back | 1164 × 172 × 18 | 1 |
| E | Front | 1200 × 190 × 18 | 1 |
Hardware
All supplied, in bags.
- ×11Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×11Cam cover cap Ø15, matching colour
- ×9Chipboard screw 4×50, countersunk
- ×6Soft furniture castor Ø30, 35 mm high, plate 38×38 with 4 screws
- ×24Chipboard screw 3.5×16, pan head
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 4
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Hardware
- 5
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.