Assembly guide
MRABBA Cube shelving
Cube shelf 2×2 · 724 × 390 × 724 mm · Item number mrabba-2x2
Before you start
- About 45 min
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel | 724 × 390 × 18 | 2 |
| B | Top panel | 688 × 390 × 18 | 1 |
| C | Bottom panel | 688 × 390 × 18 | 1 |
| D | Shelf (grid, 1 back slots) | 688 × 384 × 18 | 1 |
| E | Divider (grid, 1 front slots) | 688 × 384 × 18 | 1 |
Hardware
All supplied, in bags.
- ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×16Cam cover cap Ø15, matching colour
- ×8Beech dowel Ø8×35, fluted
- ×6Felt pad Ø28
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.