Skip to content
ryhanah
Back to the product

Assembly guide

NOUR Bedside table

Bedside table, drawer and open shelf · 450 × 400 × 600 mm · Item number nour-bedside-drawer-shelf

Before you start

  • About 1 h 15
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

EABCDFKGIH ×2J
Ref.PartSize (mm)Qty
ASide panel left440 × 380 × 181
BSide panel right440 × 380 × 181
CTop panel414 × 380 × 181
DBottom panel (drilled face down)414 × 369 × 181
EBack panel428 × 428 × 31
FFixed shelf414 × 367 × 181
GDrawer front448 × 218 × 181
HDrawer side350 × 173 × 182
IDrawer sub-front353 × 173 × 181
JDrawer back353 × 159 × 181
KDrawer bottom367 × 339 × 31

Hardware

All supplied, in bags.

  • ×1Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
  • ×10Beech dowel Ø8×35, fluted
  • ×15Chipboard screw 4×30, countersunk
  • ×4Tapered solid beech leg 160 mm, oak-stained, Ø38→Ø26, with straight mounting plate
  • ×12Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×12Cam cover cap Ø15, matching colour
  • ×1Anti-tip wall strap kit (EN 16122)

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    EABCDFKGIH ×2J

    Hardware

    • ×10 Beech dowel Ø8×35
    • ×15 Chipboard screw 4×30
    • ×12 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    EABCDFKGIH ×2J
  4. 4

    Step 4

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×4 Tapered solid beech leg 160 mm
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    EABCDFKGIH ×2J

    Hardware

    • ×1 Ball-bearing drawer slides
  6. 6

    Step 6

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  7. 7

    Step 7

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×12 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp