Skip to content
ryhanah
Back to the product

Assembly guide

NOUR Dining table

Dining table 160×90, 6 seats · 1600 × 900 × 748 mm · Item number nour-dining-table-160

Before you start

  • About 45 min
  • Two people needed
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABCDEF ×2
Ref.PartSize (mm)Qty
ATable top1600 × 900 × 181
BApron, back1520 × 100 × 181
CApron, front1520 × 100 × 181
DApron, end left784 × 100 × 181
EApron, end right784 × 100 × 181
FCross rail784 × 80 × 182

Hardware

All supplied, in bags.

  • ×4Tapered solid beech table leg 730 mm, oak-stained, Ø50→Ø34, with M8 hanger bolt, steel apron corner bracket and wing nut
  • ×16Chipboard screw 3.5×16, pan head
  • ×4Felt pad Ø28
  • ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×16Cam cover cap Ø15, matching colour
  • ×16Beech dowel Ø8×35, fluted

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABCDEF ×2

    Hardware

    • ×16 Chipboard screw 3.5×16
    • ×16 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×16 Beech dowel Ø8×35
  3. 3

    Step 3

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×4 Tapered solid beech table leg 730 mm
  4. 4

    Step 4

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×16 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp