Assembly guide
NOUR Sideboard
Sideboard 200, 4 doors + 4 drawers · 2000 × 420 × 860 mm · Item number nour-sideboard-200
Before you start
- About 3 h 30
- Two people needed
- 3 packages
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel left | 700 × 400 × 18 | 1 |
| B | Side panel right | 700 × 400 × 18 | 1 |
| C | Top panel | 1964 × 400 × 18 | 1 |
| D | Bottom panel (drilled face down) | 1964 × 389 × 18 | 1 |
| E | Back panel | 1978 × 688 × 3 | 1 |
| F | Divider 1 (left half) | 664 × 387 × 18 | 1 |
| G | Divider 1 (right half) | 664 × 387 × 18 | 1 |
| H | Divider 2 (left half) | 664 × 387 × 18 | 1 |
| I | Divider 2 (right half) | 664 × 387 × 18 | 1 |
| J | Divider 3 (left half) | 664 × 387 × 18 | 1 |
| K | Divider 3 (right half) | 664 × 387 × 18 | 1 |
| L | Fixed shelf | 464 × 387 × 18 | 4 |
| M | Adjustable shelf | 462 × 377 × 18 | 4 |
| N | Door left-hinged | 501 × 498 × 18 | 1 |
| O | Drawer front | 498 × 195 × 18 | 2 |
| P | Drawer side | 350 × 150 × 18 | 8 |
| Q | Drawer sub-front | 403 × 150 × 18 | 4 |
| R | Drawer back | 403 × 136 × 18 | 4 |
| S | Drawer bottom | 417 × 339 × 3 | 4 |
| T | Door left-hinged | 501 × 497 × 18 | 2 |
| U | Drawer front | 497 × 195 × 18 | 2 |
| V | Door right-hinged | 501 × 498 × 18 | 1 |
Hardware
All supplied, in bags.
- ×16Shelf pin Ø5, nickel
- ×8Cup hinge Ø35, 110°, soft-close, full overlay, with clip plate
- ×16Euro screw 6.3×13 (hinge plates)
- ×16Chipboard screw 3.5×16, pan head
- ×4Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
- ×28Beech dowel Ø8×35, fluted
- ×72Chipboard screw 4×30, countersunk
- ×6Tapered solid beech leg 160 mm, oak-stained, Ø38→Ø26, with straight mounting plate
- ×36Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×36Cam cover cap Ø15, matching colour
- ×1Anti-tip wall strap kit (EN 16122)
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 4
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Hardware
- 5
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
Hardware
- 6
Build the drawers
Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.
Parts
Hardware
- 7
Hang the doors
Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.
Parts
Hardware
- 8
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 9
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.