Skip to content
ryhanah
Back to the product

Assembly guide

NOUR Wardrobe

Wardrobe 150, 3 doors · 1500 × 580 × 2000 mm · Item number nour-wardrobe-3-doors

Before you start

  • About 1 h 15
  • Two people needed
  • 4 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

EABFGIJLCDHK ×4
Ref.PartSize (mm)Qty
ASide panel left1840 × 560 × 181
BSide panel right1840 × 560 × 181
CTop panel1464 × 560 × 181
DBottom panel (drilled face down)1464 × 549 × 181
EBack panel1828 × 1478 × 31
FDivider 1 (left half)1804 × 547 × 181
GDivider 1 (right half)1804 × 547 × 181
HHat shelf (fixed)968 × 547 × 181
IDoor left-hinged1838 × 499 × 181
JDoor right-hinged1838 × 499 × 181
KAdjustable shelf537 × 458 × 184
LDoor right-hinged1838 × 494 × 181

Hardware

All supplied, in bags.

  • 0.97 mOval wardrobe rail 30×15 mm, black (per metre)
  • ×2Oval rail end support, black
  • ×22Chipboard screw 3.5×16, pan head
  • ×9Cup hinge Ø35, 110°, soft-close, full overlay, with clip plate
  • ×18Euro screw 6.3×13 (hinge plates)
  • ×16Shelf pin Ø5, nickel
  • ×6Tapered solid beech leg 160 mm, oak-stained, Ø38→Ø26, with straight mounting plate
  • ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×16Cam cover cap Ø15, matching colour
  • ×6Beech dowel Ø8×35, fluted
  • ×10Chipboard screw 4×30, countersunk
  • ×1Anti-tip wall strap kit (EN 16122)

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    EABFGIJLCDHK ×4

    Hardware

    • ×16 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×6 Beech dowel Ø8×35
    • ×10 Chipboard screw 4×30
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    EABFGIJLCDHK ×4

    Hardware

    • ×22 Chipboard screw 3.5×16
  4. 4

    Step 4

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×6 Tapered solid beech leg 160 mm
  5. 5

    Step 5

    Place the shelves

    Push the shelf pins in at the height you want and lay the shelves on them.

    Parts

    EABFGIJLCDHK ×4

    Hardware

    • ×16 Shelf pin Ø5
  6. 6

    Step 6

    Fit the rail

    Screw on the supports and clip the rail in.

    Hardware

    • 0.97 m Oval wardrobe rail 30×15 mm
    • ×2 Oval rail end support
  7. 7

    Step 7

    Hang the doors

    Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.

    Parts

    EABFGIJLCDHK ×4

    Hardware

    • ×9 Cup hinge Ø35
    • ×18 Euro screw 6.3×13 (hinge plates)
  8. 8

    Step 8

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  9. 9

    Step 9

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×16 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp