Skip to content
ryhanah
Back to the product

Assembly guide

QAWS Bedside table

Bedside table, 2 drawers · 420 × 400 × 590 mm · Item number qaws-bedside-2-drawers

Before you start

  • About 1 h 30
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABECDJ ×2F ×2K ×2G ×2LHMIN
Ref.PartSize (mm)Qty
ASide panel left590 × 380 × 181
BSide panel right590 × 380 × 181
CTop panel384 × 380 × 181
DBottom panel384 × 380 × 181
EBack panel438 × 398 × 31
FDrawer front418 × 228 × 182
GDrawer side350 × 178 × 182
HDrawer sub-front323 × 178 × 181
IDrawer back323 × 164 × 181
JDrawer bottom339 × 337 × 32
KDrawer side350 × 183 × 182
LDrawer sub-front323 × 183 × 181
MDrawer back323 × 169 × 181
NPlinth back384 × 130 × 181

Hardware

All supplied, in bags.

  • ×2Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
  • ×12Beech dowel Ø8×35, fluted
  • ×25Chipboard screw 4×30, countersunk
  • ×4Felt pad Ø28
  • ×10Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×10Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABECDJ ×2F ×2K ×2G ×2LHMIN

    Hardware

    • ×12 Beech dowel Ø8×35
    • ×25 Chipboard screw 4×30
    • ×10 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    ABECDJ ×2F ×2K ×2G ×2LHMIN
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ABECDJ ×2F ×2K ×2G ×2LHMIN
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ABECDJ ×2F ×2K ×2G ×2LHMIN

    Hardware

    • ×2 Ball-bearing drawer slides
  6. 6

    Step 6

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×10 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp