Skip to content
ryhanah
Back to the product

Assembly guide

QAWS Bookcase

Bookcase 80×200, 8 arched niches · 800 × 280 × 2000 mm · Item number qaws-bookcase-80

Before you start

  • About 2 h 00
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

EABFGCDI ×4J ×4KH ×6L
Ref.PartSize (mm)Qty
ASide panel left2000 × 280 × 181
BSide panel right2000 × 280 × 181
CTop panel764 × 280 × 181
DBottom panel764 × 280 × 181
EBack panel1848 × 778 × 31
FDivider 1 (left half)1834 × 267 × 181
GDivider 1 (right half)1834 × 267 × 181
HFixed shelf364 × 267 × 186
IArched niche facade (fixed)470 × 398 × 184
JArched niche facade (fixed)460 × 398 × 184
KPlinth back764 × 130 × 181
LCentre support (recessed 156)130 × 86 × 181

Hardware

All supplied, in bags.

  • ×6Felt pad Ø28
  • ×58Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×58Cam cover cap Ø15, matching colour
  • ×48Beech dowel Ø8×35, fluted
  • ×4Chipboard screw 4×30, countersunk
  • ×1Anti-tip wall strap kit (EN 16122)

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    EABFGCDI ×4J ×4KH ×6L

    Hardware

    • ×58 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×48 Beech dowel Ø8×35
    • ×4 Chipboard screw 4×30
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    EABFGCDI ×4J ×4KH ×6L
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    EABFGCDI ×4J ×4KH ×6L
  5. 5

    Step 5

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  6. 6

    Step 6

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×6 Felt pad Ø28
    • ×58 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp