Assembly guide
QAWS Desk
Desk 105×50 with drawer · 1050 × 500 × 750 mm · Item number qaws-desk-105
Before you start
- About 1 h 15
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Allen key (supplied)
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Desk top | 1050 × 500 × 18 | 1 |
| B | Leg left | 732 × 480 × 18 | 1 |
| C | Leg right | 732 × 480 × 18 | 1 |
| D | Modesty panel | 974 × 300 × 18 | 1 |
| E | Drawer bay divider | 382 × 128 × 18 | 1 |
| F | Drawer bay bottom | 382 × 330 × 18 | 1 |
| G | Drawer front | 326 × 106 × 18 | 1 |
| H | Drawer side | 350 × 90 × 18 | 2 |
| I | Drawer sub-front | 269 × 90 × 18 | 1 |
| J | Drawer back | 269 × 76 × 18 | 1 |
| K | Drawer bottom | 339 × 283 × 3 | 1 |
Hardware
All supplied, in bags.
- ×1Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
- ×10Beech dowel Ø8×35, fluted
- ×12Chipboard screw 4×30, countersunk
- ×1Cable grommet Ø60
- ×4Felt pad Ø28
- ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×16Cam cover cap Ø15, matching colour
- ×1Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
- ×1Allen key 4 mm
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Parts
- 4
Build the drawers
Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.
Parts
Hardware
- 5
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.