Assembly guide
QAWS Dining table
Dining table 160×90, 6 seats · 1600 × 900 × 750 mm · Item number qaws-dining-table-160
Before you start
- About 1 h 00
- Two people needed
- 2 packages
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Table top | 1600 × 900 × 18 | 1 |
| B | Top doubling strip, long | 1600 × 100 × 18 | 2 |
| C | Top doubling strip, short | 700 × 100 × 18 | 2 |
| D | Top stiffening strip, centre | 700 × 100 × 18 | 1 |
| E | Panel leg left | 800 × 714 × 18 | 1 |
| F | Panel leg right | 800 × 714 × 18 | 1 |
| G | Apron, back | 1444 × 100 × 18 | 1 |
| H | Apron, front | 1444 × 100 × 18 | 1 |
| I | Cross rail | 744 × 80 × 18 | 1 |
Hardware
All supplied, in bags.
- ×4Felt pad Ø28
- ×24Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×24Cam cover cap Ø15, matching colour
- ×14Beech dowel Ø8×35, fluted
- ×21Chipboard screw 4×30, countersunk
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Parts
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.