Assembly guide
QAWS Dressing table
Dressing table 100 with drawer · 1000 × 450 × 750 mm · Item number qaws-dressing-table-100
Before you start
- About 1 h 00
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Top | 1000 × 450 × 18 | 1 |
| B | Side panel left (arched) | 732 × 450 × 18 | 1 |
| C | Side panel right (arched) | 732 × 450 × 18 | 1 |
| D | Back apron | 964 × 133 × 18 | 1 |
| E | Drawer floor | 964 × 413 × 18 | 1 |
| F | Drawer front | 960 × 130 × 18 | 1 |
| G | Drawer side | 400 × 79 × 18 | 2 |
| H | Drawer sub-front | 903 × 79 × 18 | 1 |
| I | Drawer back | 903 × 65 × 18 | 1 |
| J | Drawer bottom | 917 × 389 × 3 | 1 |
Hardware
All supplied, in bags.
- ×1Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
- ×11Beech dowel Ø8×35, fluted
- ×12Chipboard screw 4×30, countersunk
- ×4Felt pad Ø28
- ×15Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×15Cam cover cap Ø15, matching colour
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Build the drawers
Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.
Parts
Hardware
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.