Skip to content
ryhanah
Back to the product

Assembly guide

QAWS Under-bed storage

Under-bed drawer on castors 84×60 · 840 × 600 × 225 mm · Item number qaws-underbed-drawer-84x60

Before you start

  • About 45 min
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

AEDBC
Ref.PartSize (mm)Qty
ABottom (drilled face down)840 × 582 × 181
BSide left582 × 172 × 181
CSide right582 × 172 × 181
DBack804 × 172 × 181
EFront840 × 190 × 181

Hardware

All supplied, in bags.

  • ×11Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×11Cam cover cap Ø15, matching colour
  • ×9Chipboard screw 4×50, countersunk
  • ×4Soft furniture castor Ø30, 35 mm high, plate 38×38 with 4 screws
  • ×16Chipboard screw 3.5×16, pan head

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    AEDBC

    Hardware

    • ×11 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×9 Chipboard screw 4×50
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    AEDBC

    Hardware

    • ×16 Chipboard screw 3.5×16
  4. 4

    Step 4

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×4 Soft furniture castor Ø30
  5. 5

    Step 5

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×11 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp