Assembly guide
QAWS Wall shelf
Wall shelf 90×25 · 900 × 250 × 857 mm · Item number qaws-wall-shelf-90
Before you start
- About 45 min
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Shelf top (drilled face down) | 900 × 250 × 18 | 1 |
| B | Shelf bottom (screwed from below) | 900 × 250 × 18 | 1 |
| C | End panel left | 232 × 54 × 18 | 1 |
| D | End panel right | 232 × 54 × 18 | 1 |
| E | Front panel | 900 × 54 × 18 | 1 |
| F | Hanging rail (cleat screwed to its back) | 864 × 54 × 18 | 1 |
| G | Arched frame | 767 × 590 × 18 | 1 |
Hardware
All supplied, in bags.
- ×10Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×10Cam cover cap Ø15, matching colour
- ×2Beech dowel Ø8×35, fluted
- ×10Chipboard screw 4×30, countersunk
- ×14Screw cover cap, matching colour
- 0.82 mAluminium interlocking wall cleat (Z-profile pair, 38 mm, ≤ 12 mm deep), per metre
- ×9Wall plug Ø8 + screw 5×60 (solid / brick wall)
- ×5Chipboard screw 3.5×16, pan head
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 4
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 5
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.