Skip to content
ryhanah
Back to the product

Assembly guide

RIF Bed

Bed 180×200 · 1856 × 2056 × 1000 mm · Item number rif-bed-180

Before you start

  • About 1 h 30
  • Two people needed
  • 3 packages

Tools

  • Cross-head screwdriver
  • Allen key (supplied)
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABCDEJ ×8FGHI
Ref.PartSize (mm)Qty
AHeadboard1856 × 1000 × 181
BSide rail left2038 × 325 × 181
CSide rail right2038 × 325 × 181
DFoot rail1820 × 325 × 181
ECentre beam2020 × 267 × 181
FDeck cleat, left rail1880 × 60 × 181
GDeck cleat, right rail1880 × 60 × 181
HDeck cleat, beam left1880 × 60 × 181
IDeck cleat, beam right1880 × 60 × 181
JPlatform panel (ventilated)899 × 504 × 188

Hardware

All supplied, in bags.

  • ×4Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
  • ×8Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×8Cam cover cap Ø15, matching colour
  • ×6Beech dowel Ø8×35, fluted
  • ×24Chipboard screw 4×30, countersunk
  • ×8Felt pad Ø28

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABCDEJ ×8FGHI

    Hardware

    • ×4 Joint connector bolt M6×70
    • ×8 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×6 Beech dowel Ø8×35
    • ×24 Chipboard screw 4×30
  3. 3

    Step 3

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×8 Cam cover cap Ø15
    • ×8 Felt pad Ø28

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp