Skip to content
ryhanah
Back to the product

Assembly guide

RIF Bedside table

Bedside table, drawer and open shelf · 450 × 400 × 500 mm · Item number rif-bedside-drawer-shelf

Before you start

  • About 1 h 15
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABECDFKGIH ×2JLM
Ref.PartSize (mm)Qty
ASide panel left500 × 380 × 181
BSide panel right500 × 380 × 181
CTop panel414 × 380 × 181
DBottom panel414 × 380 × 181
EBack panel428 × 398 × 31
FFixed shelf414 × 367 × 181
GDrawer front448 × 186 × 181
HDrawer side350 × 141 × 182
IDrawer sub-front353 × 141 × 181
JDrawer back353 × 127 × 181
KDrawer bottom367 × 339 × 31
LPlinth front (recessed 40)414 × 80 × 181
MPlinth back414 × 80 × 181

Hardware

All supplied, in bags.

  • ×1Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
  • ×10Beech dowel Ø8×35, fluted
  • ×12Chipboard screw 4×30, countersunk
  • ×4Felt pad Ø28
  • ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×16Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABECDFKGIH ×2JLM

    Hardware

    • ×10 Beech dowel Ø8×35
    • ×12 Chipboard screw 4×30
    • ×16 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    ABECDFKGIH ×2JLM
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ABECDFKGIH ×2JLM
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ABECDFKGIH ×2JLM

    Hardware

    • ×1 Ball-bearing drawer slides
  6. 6

    Step 6

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×16 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp