Skip to content
ryhanah
Back to the product

Assembly guide

RIF Bookcase

Bookcase 80×200 with 2 lower doors · 800 × 300 × 2000 mm · Item number rif-bookcase-80-doors

Before you start

  • About 1 h 15
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

EABHICDFG ×4JK
Ref.PartSize (mm)Qty
ASide panel left2000 × 280 × 181
BSide panel right2000 × 280 × 181
CTop panel764 × 280 × 181
DBottom panel764 × 280 × 181
EBack panel1898 × 778 × 31
FFixed shelf764 × 267 × 181
GAdjustable shelf762 × 257 × 184
HDoor left-hinged745 × 398 × 181
IDoor right-hinged745 × 398 × 181
JPlinth front (recessed 40)764 × 80 × 181
KPlinth back764 × 80 × 181

Hardware

All supplied, in bags.

  • ×16Shelf pin Ø5, nickel
  • ×4Cup hinge Ø35, 110°, free-swinging (no soft-close, for push-to-open), full overlay, with clip plate
  • ×8Euro screw 6.3×13 (hinge plates)
  • ×12Chipboard screw 3.5×16, pan head
  • ×2Push-to-open latch, magnetic
  • ×4Felt pad Ø28
  • ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×16Cam cover cap Ø15, matching colour
  • ×6Beech dowel Ø8×35, fluted
  • ×1Anti-tip wall strap kit (EN 16122)

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    EABHICDFG ×4JK

    Hardware

    • ×16 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×6 Beech dowel Ø8×35
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    EABHICDFG ×4JK
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    EABHICDFG ×4JK

    Hardware

    • ×12 Chipboard screw 3.5×16
  5. 5

    Step 5

    Place the shelves

    Push the shelf pins in at the height you want and lay the shelves on them.

    Parts

    EABHICDFG ×4JK

    Hardware

    • ×16 Shelf pin Ø5
  6. 6

    Step 6

    Hang the doors

    Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.

    Parts

    EABHICDFG ×4JK

    Hardware

    • ×4 Cup hinge Ø35
    • ×8 Euro screw 6.3×13 (hinge plates)
    • ×2 Push-to-open latch
  7. 7

    Step 7

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  8. 8

    Step 8

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×16 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp