Assembly guide
RIF Coat rack
Coat panel 80 with hat shelf and hooks · 800 × 280 × 500 mm · Item number rif-coat-panel-80
Before you start
- About 45 min
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Cheek left | 482 × 260 × 18 | 1 |
| B | Cheek right | 482 × 260 × 18 | 1 |
| C | Back panel (hooks) | 764 × 482 × 18 | 1 |
| D | Hat shelf | 800 × 280 × 18 | 1 |
Hardware
All supplied, in bags.
- ×8Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×8Cam cover cap Ø15, matching colour
- ×7Beech dowel Ø8×35, fluted
- ×5Double coat hook, matt black steel, 2 screws at 32 mm pitch
- ×10Chipboard screw 3.5×16, pan head
- ×4Frame fixing screw 6×100 + plug
- ×4Snap-on screw cover cap with washer, matching colour
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 4
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 5
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.