Skip to content
ryhanah
Back to the product

Assembly guide

RIF Dining table

Dining table 120×80, 4 seats · 1200 × 800 × 750 mm · Item number rif-dining-table-120

Before you start

  • About 1 h 30
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

AB ×2H ×2I ×2D ×2E ×2C ×2F ×2G ×2
Ref.PartSize (mm)Qty
ATable top1200 × 800 × 181
BTop doubling strip, long1200 × 100 × 182
CTop doubling strip, short600 × 100 × 182
DLeg face board A714 × 90 × 182
ELeg face board B714 × 90 × 182
FLeg side board A714 × 72 × 182
GLeg side board B714 × 72 × 182
HApron, long1144 × 100 × 182
IApron, short708 × 100 × 182

Hardware

All supplied, in bags.

  • ×4Felt pad Ø28
  • ×18Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×18Cam cover cap Ø15, matching colour
  • ×16Beech dowel Ø8×35, fluted
  • ×36Chipboard screw 4×30, countersunk

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    AB ×2H ×2I ×2D ×2E ×2C ×2F ×2G ×2

    Hardware

    • ×18 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×16 Beech dowel Ø8×35
    • ×36 Chipboard screw 4×30
  3. 3

    Step 3

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Parts

    AB ×2H ×2I ×2D ×2E ×2C ×2F ×2G ×2
  4. 4

    Step 4

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×18 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp