Skip to content
ryhanah
Back to the product

Assembly guide

RIF Sideboard

Sideboard 120, 2 doors · 1200 × 420 × 820 mm · Item number rif-sideboard-120

Before you start

  • About 1 h 15
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ECDIJABFGH ×2KL
Ref.PartSize (mm)Qty
ASide panel left820 × 400 × 181
BSide panel right820 × 400 × 181
CTop panel1164 × 400 × 181
DBottom panel1164 × 400 × 181
EBack panel1178 × 718 × 31
FDivider 1 (left half)704 × 387 × 181
GDivider 1 (right half)704 × 387 × 181
HAdjustable shelf562 × 377 × 182
IDoor left-hinged738 × 598 × 181
JDoor right-hinged738 × 598 × 181
KPlinth front (recessed 40)1164 × 80 × 181
LPlinth back1164 × 80 × 181

Hardware

All supplied, in bags.

  • ×8Shelf pin Ø5, nickel
  • ×4Cup hinge Ø35, 110°, free-swinging (no soft-close, for push-to-open), full overlay, with clip plate
  • ×8Euro screw 6.3×13 (hinge plates)
  • ×12Chipboard screw 3.5×16, pan head
  • ×2Push-to-open latch, magnetic
  • ×4Felt pad Ø28
  • ×20Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×20Cam cover cap Ø15, matching colour
  • ×4Beech dowel Ø8×35, fluted
  • ×4Chipboard screw 4×30, countersunk

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ECDIJABFGH ×2KL

    Hardware

    • ×20 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×4 Beech dowel Ø8×35
    • ×4 Chipboard screw 4×30
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    ECDIJABFGH ×2KL
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ECDIJABFGH ×2KL

    Hardware

    • ×12 Chipboard screw 3.5×16
  5. 5

    Step 5

    Place the shelves

    Push the shelf pins in at the height you want and lay the shelves on them.

    Parts

    ECDIJABFGH ×2KL

    Hardware

    • ×8 Shelf pin Ø5
  6. 6

    Step 6

    Hang the doors

    Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.

    Parts

    ECDIJABFGH ×2KL

    Hardware

    • ×4 Cup hinge Ø35
    • ×8 Euro screw 6.3×13 (hinge plates)
    • ×2 Push-to-open latch
  7. 7

    Step 7

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×20 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp