Assembly guide
SAFI Console table
Console table 120×35 with shelf · 1200 × 350 × 750 mm · Item number safi-console-120
Before you start
- About 1 h 00
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel left | 732 × 350 × 18 | 1 |
| B | Side panel right | 732 × 350 × 18 | 1 |
| C | Table top | 1200 × 350 × 18 | 1 |
| D | Front rail (recessed 30) | 1164 × 100 × 18 | 1 |
| E | Back rail (recessed 30) | 1164 × 100 × 18 | 1 |
| F | Shelf (drilled face down) | 1164 × 310 × 18 | 1 |
| G | Shelf doubling strip | 1164 × 70 × 18 | 2 |
Hardware
All supplied, in bags.
- ×4Felt pad Ø28
- ×18Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×18Cam cover cap Ø15, matching colour
- ×16Beech dowel Ø8×35, fluted
- ×10Chipboard screw 4×30, countersunk
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.