Skip to content
ryhanah
Back to the product

Assembly guide

SAFI Desk

Corner desk 140×140 · 1400 × 1400 × 750 mm · Item number safi-desk-corner-140

Before you start

  • About 45 min
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Allen key (supplied)
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

AFEBCD
Ref.PartSize (mm)Qty
ADesk top, L-shaped1400 × 1400 × 181
BLeg, back wing end732 × 580 × 181
CLeg, side wing end732 × 580 × 181
DLeg, inner corner732 × 482 × 181
EModesty panel, back wall1264 × 350 × 181
FModesty panel, side wall1282 × 350 × 181

Hardware

All supplied, in bags.

  • ×2Cable grommet Ø60
  • ×6Felt pad Ø28
  • ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×16Cam cover cap Ø15, matching colour
  • ×5Beech dowel Ø8×35, fluted
  • ×4Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
  • ×1Allen key 4 mm

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    AFEBCD

    Hardware

    • ×16 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×5 Beech dowel Ø8×35
    • ×4 Joint connector bolt M6×70
  3. 3

    Step 3

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Parts

    AFEBCD
  4. 4

    Step 4

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×2 Cable grommet Ø60
    • ×6 Felt pad Ø28
    • ×16 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp