Skip to content
ryhanah
Back to the product

Assembly guide

SAFI Dining table

Round dining table Ø100, 4 seats · 1000 × 1000 × 750 mm · Item number safi-dining-table-round-100

Before you start

  • About 45 min
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Allen key (supplied)
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABCDE
Ref.PartSize (mm)Qty
ATable top, round Ø1001000 × 1000 × 181
BTop doubling disc (underside)1000 × 1000 × 181
CCross base, full panel900 × 714 × 181
DCross base, front half714 × 441 × 181
ECross base, back half714 × 441 × 181

Hardware

All supplied, in bags.

  • ×4Felt pad Ø28
  • ×6Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×6Cam cover cap Ø15, matching colour
  • ×8Beech dowel Ø8×35, fluted
  • ×8Chipboard screw 4×30, countersunk
  • ×3Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
  • ×1Allen key 4 mm

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABCDE

    Hardware

    • ×6 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×8 Beech dowel Ø8×35
    • ×8 Chipboard screw 4×30
    • ×3 Joint connector bolt M6×70
  3. 3

    Step 3

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×6 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp