Assembly guide
SAFI Entryway bench
Entry bench 100 with 2 shoe shelves · 1000 × 350 × 500 mm · Item number safi-entry-bench-100
Before you start
- About 1 h 15
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | End panel left | 482 × 350 × 18 | 1 |
| B | End panel right | 482 × 350 × 18 | 1 |
| C | Centre leg (left half) | 482 × 350 × 18 | 1 |
| D | Centre leg (right half) | 482 × 350 × 18 | 1 |
| E | Seat | 1000 × 350 × 18 | 1 |
| F | Shoe shelf | 464 × 330 × 18 | 4 |
| G | Back rail | 464 × 100 × 18 | 2 |
| H | Kick strip front (recessed 30) | 464 × 60 × 18 | 2 |
| I | Kick strip back | 464 × 60 × 18 | 2 |
Hardware
All supplied, in bags.
- ×6Felt pad Ø28
- ×36Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×36Cam cover cap Ø15, matching colour
- ×20Beech dowel Ø8×35, fluted
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the base
Screw the base under the frame, lining up its edges before tightening.
Parts
- 4
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
- 5
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Parts
- 6
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
- 7
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.