Assembly guide
SHEBKA Bed
Bed 140×190 · 1456 × 1956 × 1150 mm · Item number shebka-bed-140
Before you start
- About 1 h 30
- Two people needed
- 3 packages
Tools
- Cross-head screwdriver
- Allen key (supplied)
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Headboard | 1456 × 1150 × 18 | 1 |
| B | Side rail left | 1938 × 480 × 18 | 1 |
| C | Side rail right | 1938 × 480 × 18 | 1 |
| D | Foot rail | 1420 × 480 × 18 | 1 |
| E | Centre beam | 1920 × 422 × 18 | 1 |
| F | Deck cleat, left rail | 1780 × 60 × 18 | 1 |
| G | Deck cleat, right rail | 1780 × 60 × 18 | 1 |
| H | Deck cleat, beam left | 1780 × 60 × 18 | 1 |
| I | Deck cleat, beam right | 1780 × 60 × 18 | 1 |
| J | Platform panel (ventilated) | 699 × 479 × 18 | 8 |
| K | Headboard lattice panel (lacquered MDF, cane behind) | 1156 × 420 × 12 | 1 |
Hardware
All supplied, in bags.
- ×10Chipboard screw 4×25, countersunk
- ×4Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
- ×8Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×8Cam cover cap Ø15, matching colour
- ×6Beech dowel Ø8×35, fluted
- ×24Chipboard screw 4×30, countersunk
- ×8Felt pad Ø28
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.