Skip to content
ryhanah
Back to the product

Assembly guide

SHEBKA Chest of drawers

Wide chest of 6 drawers · 1400 × 450 × 880 mm · Item number shebka-chest-6-wide

Before you start

  • About 3 h 15
  • Two people needed
  • 3 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ECDABFGL ×6H ×6N ×4J ×2O ×4K ×2M ×8I ×4
Ref.PartSize (mm)Qty
ASide panel left720 × 430 × 181
BSide panel right720 × 430 × 181
CTop panel1364 × 430 × 181
DBottom panel (drilled face down)1364 × 419 × 181
EBack panel1378 × 708 × 31
FDivider 1 (left half)684 × 417 × 181
GDivider 1 (right half)684 × 417 × 181
HDrawer front698 × 237 × 186
IDrawer side400 × 187 × 184
JDrawer sub-front603 × 187 × 182
KDrawer back603 × 173 × 182
LDrawer bottom617 × 389 × 36
MDrawer side400 × 192 × 188
NDrawer sub-front603 × 192 × 184
ODrawer back603 × 178 × 184

Hardware

All supplied, in bags.

  • ×6Ball-bearing drawer slides, 45 mm, full extension, push-to-open (tip-on) (pair)
  • ×28Beech dowel Ø8×35, fluted
  • ×82Chipboard screw 4×30, countersunk
  • ×6Slim steel furniture leg 160 mm, 20×20 square tube, matt black, welded mounting plate + 4 screws
  • ×12Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×12Cam cover cap Ø15, matching colour
  • ×1Anti-tip wall strap kit (EN 16122)

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ECDABFGL ×6H ×6N ×4J ×2O ×4K ×2M ×8I ×4

    Hardware

    • ×28 Beech dowel Ø8×35
    • ×82 Chipboard screw 4×30
    • ×12 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ECDABFGL ×6H ×6N ×4J ×2O ×4K ×2M ×8I ×4
  4. 4

    Step 4

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×6 Slim steel furniture leg 160 mm
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ECDABFGL ×6H ×6N ×4J ×2O ×4K ×2M ×8I ×4

    Hardware

    • ×6 Ball-bearing drawer slides
  6. 6

    Step 6

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  7. 7

    Step 7

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×12 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp