Skip to content
ryhanah
Back to the product

Assembly guide

SHEBKA Console table

Console table 120×35 with lattice drawer · 1200 × 350 × 750 mm · Item number shebka-console-120

Before you start

  • About 1 h 15
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABMIKLEFGHCDJ ×2
Ref.PartSize (mm)Qty
ATable top1200 × 350 × 181
BApron, back1150 × 170 × 181
CLattice apron, end left264 × 170 × 181
DLattice apron, end right264 × 170 × 181
ELattice apron, front left307 × 170 × 181
FLattice apron, front right307 × 170 × 181
GDrawer runner left282 × 170 × 181
HDrawer runner right282 × 170 × 181
IDrawer front496 × 166 × 181
JDrawer side250 × 154 × 182
KDrawer sub-front439 × 154 × 181
LDrawer back439 × 140 × 181
MDrawer bottom453 × 239 × 31

Hardware

All supplied, in bags.

  • ×16Chipboard screw 3.5×16, pan head
  • ×4Slim steel desk / console leg 728 mm, 30×30 square tube, matt black, welded top plate 60×60 + 4 screws, levelling glide (+4 mm), drilled for the apron screws
  • ×1Ball-bearing drawer slides, 45 mm, full extension, push-to-open (tip-on) (pair)
  • ×16Beech dowel Ø8×35, fluted
  • ×12Chipboard screw 4×30, countersunk
  • ×15Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×15Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABMIKLEFGHCDJ ×2

    Hardware

    • ×16 Beech dowel Ø8×35
    • ×12 Chipboard screw 4×30
    • ×15 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×4 Slim steel desk / console leg 728 mm
  4. 4

    Step 4

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ABMIKLEFGHCDJ ×2

    Hardware

    • ×16 Chipboard screw 3.5×16
    • ×1 Ball-bearing drawer slides
  5. 5

    Step 5

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×15 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp