Assembly guide
SHEBKA Entryway bench
Entry bench 100 with 2 shoe shelves · 1000 × 350 × 500 mm · Item number shebka-entry-bench-100
Before you start
- About 1 h 15
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side panel left | 330 × 322 × 18 | 1 |
| B | Side panel right | 330 × 322 × 18 | 1 |
| C | Top panel | 964 × 330 × 18 | 1 |
| D | Bottom panel (drilled face down) | 964 × 319 × 18 | 1 |
| E | Back panel | 978 × 310 × 3 | 1 |
| F | Divider 1 (left half) | 317 × 286 × 18 | 1 |
| G | Divider 1 (right half) | 317 × 286 × 18 | 1 |
| H | Adjustable shelf | 462 × 307 × 18 | 2 |
| I | Door left-hinged, 4 mm under the top | 498 × 317 × 18 | 1 |
| J | Door right-hinged, 4 mm under the top | 498 × 317 × 18 | 1 |
| K | Seat (lies on the carcass, screwed up through the top) | 1000 × 350 × 18 | 1 |
Hardware
All supplied, in bags.
- ×8Shelf pin Ø5, nickel
- ×4Cup hinge Ø35, 110°, free-swinging (no soft-close, for push-to-open), full overlay, with clip plate
- ×8Euro screw 6.3×13 (hinge plates)
- ×12Chipboard screw 3.5×16, pan head
- ×2Push-to-open latch, magnetic
- ×6Slim steel furniture leg 160 mm, 20×20 square tube, matt black, welded mounting plate + 4 screws
- ×12Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×12Cam cover cap Ø15, matching colour
- ×4Beech dowel Ø8×35, fluted
- ×15Chipboard screw 4×30, countersunk
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
Hardware
- 4
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Hardware
- 5
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
Hardware
- 6
Hang the doors
Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.
Parts
Hardware
- 7
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.