SHEBKA Shoe cabinet

Steps

1. 1

   Step 1

   Prepare

   Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

2. 2

   Step 2

   Build the frame

   Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

   Parts

   Hardware

   • ×46 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
   • ×26 Beech dowel Ø8×35
   • ×3 Chipboard screw 4×30
   • ×3 Tilt-out compartment pivot pair
3. 3

   Step 3

   Fix the back

   Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

   Parts

   Hardware

   • ×18 Chipboard screw 3.5×16
4. 4

   Step 4

   Fit the legs

   Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

   Hardware

   • ×4 Slim steel furniture leg 160 mm
5. 5

   Step 5

   Build the drawers

   Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

   Parts
6. 6

   Step 6

   Hang the doors

   Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.

   Hardware

   • ×3 Push-to-open latch
7. 7

   Step 7

   Fix to the wall

   Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

   Hardware

   • ×1 Anti-tip wall strap kit (EN 16122)
8. 8

   Step 8

   Finishing

   Fit the screw and cam covers, the felt pads and the accessories.

   Hardware

   • ×46 Cam cover cap Ø15
   • ×6 Felt pad Ø28