Assembly guide
SHEBKA Side table
Side table 50×50 with shelf · 500 × 500 × 500 mm · Item number shebka-side-table-50
Before you start
- About 45 min
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Table top | 500 × 500 × 18 | 1 |
| B | Lattice apron, back | 420 × 150 × 18 | 1 |
| C | Lattice apron, front | 420 × 150 × 18 | 1 |
| D | Lattice apron, end left | 384 × 150 × 18 | 1 |
| E | Lattice apron, end right | 384 × 150 × 18 | 1 |
| F | Lower shelf | 384 × 334 × 18 | 1 |
Hardware
All supplied, in bags.
- ×16Chipboard screw 3.5×16, pan head
- ×4Slim steel side-table leg 478 mm, 25×25 square tube, matt black, welded top plate 60×60 + 4 screws, levelling glide (+4 mm), drilled for the lower shelf and the apron screws
- ×4Chipboard screw 4×50, countersunk
- ×8Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×8Cam cover cap Ø15, matching colour
- ×8Beech dowel Ø8×35, fluted
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Hardware
- 4
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
- 5
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.