Skip to content
ryhanah
Back to the product

Assembly guide

SHEBKA TV bench

TV bench 160, 2 doors + open niche · 1600 × 400 × 480 mm · Item number shebka-tv-bench-160

Before you start

  • About 1 h 00
  • Two people needed
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

CDEJKABFGHI
Ref.PartSize (mm)Qty
ASide panel left380 × 320 × 181
BSide panel right380 × 320 × 181
CTop panel1564 × 380 × 181
DBottom panel (drilled face down)1564 × 369 × 181
EBack panel1578 × 308 × 31
FDivider 1 (left half)367 × 284 × 181
GDivider 1 (right half)367 × 284 × 181
HDivider 2 (left half)367 × 284 × 181
IDivider 2 (right half)367 × 284 × 181
JDoor left-hinged560 × 318 × 181
KDoor right-hinged560 × 318 × 181

Hardware

All supplied, in bags.

  • ×4Cup hinge Ø35, 110°, free-swinging (no soft-close, for push-to-open), full overlay, with clip plate
  • ×8Euro screw 6.3×13 (hinge plates)
  • ×12Chipboard screw 3.5×16, pan head
  • ×2Push-to-open latch, magnetic
  • ×6Slim steel furniture leg 160 mm, 20×20 square tube, matt black, welded mounting plate + 4 screws
  • ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×16Cam cover cap Ø15, matching colour
  • ×4Beech dowel Ø8×35, fluted
  • ×16Chipboard screw 4×30, countersunk

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    CDEJKABFGHI

    Hardware

    • ×16 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×4 Beech dowel Ø8×35
    • ×16 Chipboard screw 4×30
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    CDEJKABFGHI

    Hardware

    • ×12 Chipboard screw 3.5×16
  4. 4

    Step 4

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×6 Slim steel furniture leg 160 mm
  5. 5

    Step 5

    Hang the doors

    Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.

    Parts

    CDEJKABFGHI

    Hardware

    • ×4 Cup hinge Ø35
    • ×8 Euro screw 6.3×13 (hinge plates)
    • ×2 Push-to-open latch
  6. 6

    Step 6

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×16 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp