Skip to content
ryhanah
Back to the product

Assembly guide

ZAHRA Bedside table

Bedside table, open · 400 × 350 × 480 mm · Item number zahra-bedside-open

Before you start

  • About 1 h 00
  • One person is enough
  • 1 package

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABECDFGH
Ref.PartSize (mm)Qty
ASide panel left480 × 330 × 181
BSide panel right480 × 330 × 181
CTop panel364 × 330 × 181
DBottom panel364 × 330 × 181
EBack panel398 × 378 × 31
FFixed shelf364 × 317 × 181
GPlinth front (recessed 30)364 × 60 × 181
HPlinth back364 × 60 × 181

Hardware

All supplied, in bags.

  • ×4Felt pad Ø28
  • ×16Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×16Cam cover cap Ø15, matching colour
  • ×6Beech dowel Ø8×35, fluted

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABECDFGH

    Hardware

    • ×16 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
    • ×6 Beech dowel Ø8×35
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    ABECDFGH
  4. 4

    Step 4

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ABECDFGH
  5. 5

    Step 5

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28
    • ×16 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp