Assembly guide
ZAHRA Changing table
Changing table 80 with shelves · 800 × 550 × 1050 mm · Item number zahra-changing-table-80
Before you start
- About 1 h 00
- Two people needed
- 2 packages
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Side left (rim) | 1050 × 550 × 18 | 1 |
| B | Side right (rim) | 1050 × 550 × 18 | 1 |
| C | Back board (back rim) | 990 × 764 × 18 | 1 |
| D | Changing top | 764 × 532 × 18 | 1 |
| E | Fixed shelf | 764 × 512 × 18 | 1 |
| F | Bottom panel | 764 × 532 × 18 | 1 |
| G | Plinth front (recessed 30) | 764 × 60 × 18 | 1 |
| H | Plinth back | 764 × 60 × 18 | 1 |
Hardware
All supplied, in bags.
- ×24Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×24Cam cover cap Ø15, matching colour
- ×17Beech dowel Ø8×35, fluted
- ×4Felt pad Ø28
- ×1Anti-tip wall strap kit (EN 16122)
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the base
Screw the base under the frame, lining up its edges before tightening.
Parts
- 4
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
- 5
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
- 6
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 7
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.