Skip to content
ryhanah
Back to the product

Assembly guide

ZAHRA Baby bed

Crib 60×120 · 702 × 1242 × 980 mm · Item number zahra-crib-60x120

Before you start

  • About 45 min
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Allen key (supplied)

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

B ×2CA ×2
Ref.PartSize (mm)Qty
AEnd panel (head / foot)980 × 702 × 182
BSlotted side (front side removable)1206 × 760 × 182
CMattress base (ventilated)1206 × 602 × 181

Hardware

All supplied, in bags.

  • ×12Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
  • ×1Allen key 4 mm
  • ×4Felt pad Ø28

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    B ×2CA ×2

    Hardware

    • ×12 Joint connector bolt M6×70
  3. 3

    Step 3

    Fit the base

    Screw the base under the frame, lining up its edges before tightening.

    Parts

    B ×2CA ×2
  4. 4

    Step 4

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×4 Felt pad Ø28

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp