Assembly guide
ZAHRA Loft bed
Low loft bed 90×190 · 1956 × 1026 × 1350 mm · Item number zahra-loft-bed-90
Before you start
- About 1 h 30
- Two people needed
- 3 packages
Tools
- Cross-head screwdriver
- Allen key (supplied)
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | End panel, head | 1350 × 956 × 18 | 1 |
| B | End panel, foot | 1350 × 956 × 18 | 1 |
| C | Upper rail, wall side | 1920 × 470 × 18 | 1 |
| D | Upper rail, front (access opening) | 1920 × 470 × 18 | 1 |
| E | Stiffening rail, wall side (under the bed) | 1920 × 300 × 18 | 1 |
| F | Deck cleat | 1820 × 60 × 18 | 2 |
| G | Bed base panel, birch ply (ventilated) | 916 × 479 × 18 | 4 |
| H | Ladder stringer left | 1220 × 70 × 18 | 1 |
| I | Ladder stringer right | 1220 × 70 × 18 | 1 |
| J | Ladder rung (tread) | 420 × 60 × 18 | 3 |
Hardware
All supplied, in bags.
- ×16Beech dowel Ø8×35, fluted
- ×22Joint connector bolt M6×70, black, flat head Ø13 + barrel nut Ø10
- ×12Chipboard screw 4×30, countersunk
- ×28Chipboard screw 4×50, countersunk
- ×2Anti-tip wall strap kit (EN 16122)
- ×4Felt pad Ø28
- ×1Allen key 4 mm
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.