Assembly guide
HAWA Entryway bench
Entry bench 120 with 2 shoe shelves · 1200 × 350 × 500 mm · Item number hawa-entry-bench-120
Before you start
- About 1 h 15
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
- Drill for the wall fixing
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | End panel left | 364 × 350 × 18 | 1 |
| B | End panel right | 364 × 350 × 18 | 1 |
| C | Centre leg (left half) | 364 × 350 × 18 | 1 |
| D | Centre leg (right half) | 364 × 350 × 18 | 1 |
| E | Seat | 1200 × 350 × 18 | 1 |
| F | Shoe shelf | 564 × 330 × 18 | 2 |
| G | Back rail (screwed to the wall) | 564 × 100 × 18 | 2 |
| H | Base board (drilled face down) | 1200 × 350 × 18 | 1 |
| I | Base frame front (set 90 in) | 1020 × 100 × 18 | 1 |
| J | Base frame back | 1020 × 100 × 18 | 1 |
| K | Base frame side left | 204 × 100 × 18 | 1 |
| L | Base frame side right | 204 × 100 × 18 | 1 |
Hardware
All supplied, in bags.
- ×4Felt pad Ø28
- ×2Frame fixing screw 6×100 + plug
- ×2Snap-on screw cover cap with washer, matching colour
- ×34Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×34Cam cover cap Ø15, matching colour
- ×16Beech dowel Ø8×35, fluted
- ×12Chipboard screw 4×50, countersunk
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Fit the base
Screw the base under the frame, lining up its edges before tightening.
Parts
- 4
Fix the back
Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.
Parts
- 5
Fit the legs
Screw the legs or their plates into the pre-drilled positions, then stand the piece up.
Parts
- 6
Place the shelves
Push the shelf pins in at the height you want and lay the shelves on them.
Parts
- 7
Fix to the wall
Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.
Hardware
- 8
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.