Skip to content
ryhanah
Back to the product

Assembly guide

HAWA Sideboard

Sideboard 160, wall-hung, 3 doors + 3 drawers · 1600 × 420 × 560 mm · Item number hawa-sideboard-160

Before you start

  • About 2 h 45
  • Two people needed
  • 3 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ECDABUFGHILTRJ ×3K ×3Q ×3M ×2SO ×3P ×3N ×6
Ref.PartSize (mm)Qty
ASide panel left560 × 400 × 181
BSide panel right560 × 400 × 181
CTop panel1564 × 400 × 181
DBottom panel1564 × 400 × 181
EBack panel1578 × 538 × 31
FDivider 1 (left half)524 × 369 × 181
GDivider 1 (right half)524 × 369 × 181
HDivider 2 (left half)524 × 369 × 181
IDivider 2 (right half)524 × 369 × 181
JFixed shelf497 × 369 × 183
KAdjustable shelf495 × 359 × 183
LDoor left-hinged531 × 361 × 181
MDrawer front531 × 195 × 182
NDrawer side350 × 150 × 186
ODrawer sub-front436 × 150 × 183
PDrawer back436 × 136 × 183
QDrawer bottom450 × 339 × 33
RDoor left-hinged530 × 361 × 181
SDrawer front530 × 195 × 181
TDoor right-hinged531 × 361 × 181
UHanging rail (screwed to the wall)1564 × 80 × 181

Hardware

All supplied, in bags.

  • ×12Shelf pin Ø5, nickel
  • ×6Cup hinge Ø35, 110°, free-swinging (no soft-close, for push-to-open), full overlay, with clip plate
  • ×12Euro screw 6.3×13 (hinge plates)
  • ×18Chipboard screw 3.5×16, pan head
  • ×3Push-to-open latch, magnetic
  • ×3Ball-bearing drawer slides, 45 mm, full extension, push-to-open (tip-on) (pair)
  • ×24Beech dowel Ø8×35, fluted
  • ×36Chipboard screw 4×30, countersunk
  • ×4Frame fixing screw 6×100 + plug
  • ×38Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×38Cam cover cap Ø15, matching colour

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ECDABUFGHILTRJ ×3K ×3Q ×3M ×2SO ×3P ×3N ×6

    Hardware

    • ×24 Beech dowel Ø8×35
    • ×36 Chipboard screw 4×30
    • ×38 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ECDABUFGHILTRJ ×3K ×3Q ×3M ×2SO ×3P ×3N ×6

    Hardware

    • ×18 Chipboard screw 3.5×16
  4. 4

    Step 4

    Place the shelves

    Push the shelf pins in at the height you want and lay the shelves on them.

    Parts

    ECDABUFGHILTRJ ×3K ×3Q ×3M ×2SO ×3P ×3N ×6

    Hardware

    • ×12 Shelf pin Ø5
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ECDABUFGHILTRJ ×3K ×3Q ×3M ×2SO ×3P ×3N ×6

    Hardware

    • ×3 Ball-bearing drawer slides
  6. 6

    Step 6

    Hang the doors

    Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.

    Parts

    ECDABUFGHILTRJ ×3K ×3Q ×3M ×2SO ×3P ×3N ×6

    Hardware

    • ×6 Cup hinge Ø35
    • ×12 Euro screw 6.3×13 (hinge plates)
    • ×3 Push-to-open latch
  7. 7

    Step 7

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×4 Frame fixing screw 6×100 + plug
  8. 8

    Step 8

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×38 Cam cover cap Ø15

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp