Assembly guide
MRABBA Cube shelf insert
Insert with 2 drawers · 333 × 380 × 333 mm · Item number mrabba-insert-drawers
Before you start
- About 1 h 30
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Box side left | 362 × 333 × 18 | 1 |
| B | Box side right | 362 × 333 × 18 | 1 |
| C | Box top | 362 × 297 × 18 | 1 |
| D | Box bottom | 362 × 297 × 18 | 1 |
| E | Drawer front | 331 × 164 × 18 | 2 |
| F | Drawer side | 350 × 119 × 18 | 4 |
| G | Drawer sub-front | 236 × 119 × 18 | 2 |
| H | Drawer back | 236 × 105 × 18 | 2 |
| I | Drawer bottom | 339 × 250 × 3 | 2 |
Hardware
All supplied, in bags.
- ×8Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×8Cam cover cap Ø15, matching colour
- ×12Beech dowel Ø8×35, fluted
- ×26Chipboard screw 4×30, countersunk
- ×4Felt pad Ø28
- ×2Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Build the drawers
Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.
Parts
Hardware
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.