Assembly guide
MRABBA Cube shelf insert
Insert with door · 333 × 380 × 333 mm · Item number mrabba-insert-door
Before you start
- About 45 min
- One person is enough
- 1 package
Tools
- Cross-head screwdriver
- Mallet, or a hammer and a wood block
Parts
Every part carries its letter. Check everything is there before you start.
| Ref. | Part | Size (mm) | Qty |
|---|---|---|---|
| A | Box side left | 360 × 333 × 18 | 1 |
| B | Box side right | 360 × 333 × 18 | 1 |
| C | Box top | 360 × 297 × 18 | 1 |
| D | Box bottom | 360 × 297 × 18 | 1 |
| E | Box back | 311 × 311 × 3 | 1 |
| F | Door | 331 × 331 × 18 | 1 |
Hardware
All supplied, in bags.
- ×8Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
- ×8Cam cover cap Ø15, matching colour
- ×4Beech dowel Ø8×35, fluted
- ×2Chipboard screw 4×30, countersunk
- ×4Felt pad Ø28
- ×2Cup hinge Ø35, 110°, soft-close, full overlay, with clip plate
- ×4Euro screw 6.3×13 (hinge plates)
- ×8Chipboard screw 3.5×16, pan head
Steps
- 1
Prepare
Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.
- 2
Build the frame
Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.
Parts
Hardware
- 3
Hang the doors
Screw the hinges to the doors, clip them onto their plates, then align the doors with the hinge screws.
Parts
Hardware
- 4
Finishing
Fit the screw and cam covers, the felt pads and the accessories.
Hardware
A part missing or damaged?
Send us a photo on WhatsApp with your reservation number and we send the replacement part.