Skip to content
ryhanah
Back to the product

Assembly guide

NOUR Desk

Desk 140×60 with drawer unit · 1400 × 600 × 748 mm · Item number nour-desk-140-unit

Before you start

  • About 2 h 15
  • Two people needed
  • 2 packages

Tools

  • Cross-head screwdriver
  • Mallet, or a hammer and a wood block
  • Drill for the wall fixing

Parts

Every part carries its letter. Check everything is there before you start.

Parts to scale

ABFGJHIEO ×3K ×3CDL ×2P ×4MNQ ×2R ×2
Ref.PartSize (mm)Qty
ADesk top1400 × 600 × 181
BModesty panel (back apron)1340 × 300 × 181
CApron, end left454 × 110 × 181
DApron, end right454 × 110 × 181
EApron, front1340 × 110 × 181
FSide panel left440 × 430 × 181
GSide panel right440 × 430 × 181
HTop panel430 × 364 × 181
IBottom panel (drilled face down)419 × 364 × 181
JBack panel428 × 378 × 31
KDrawer front398 × 144 × 183
LDrawer side400 × 94 × 182
MDrawer sub-front303 × 94 × 181
NDrawer back303 × 80 × 181
ODrawer bottom389 × 317 × 33
PDrawer side400 × 99 × 184
QDrawer sub-front303 × 99 × 182
RDrawer back303 × 85 × 182

Hardware

All supplied, in bags.

  • ×4Tapered solid beech table leg 730 mm, oak-stained, Ø50→Ø34, with M8 hanger bolt, steel apron corner bracket and wing nut
  • ×16Chipboard screw 3.5×16, pan head
  • ×3Ball-bearing drawer slides, 45 mm, ¾ extension (pair)
  • ×24Beech dowel Ø8×35, fluted
  • ×39Chipboard screw 4×30, countersunk
  • ×4Tapered solid beech leg 160 mm, oak-stained, Ø38→Ø26, with straight mounting plate
  • ×18Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  • ×18Cam cover cap Ø15, matching colour
  • ×1Anti-tip wall strap kit (EN 16122)
  • ×4Felt pad Ø28
  • ×1Cable grommet Ø60

Steps

  1. 1

    Step 1

    Prepare

    Open the boxes on a rug or flattened cardboard. Sort the parts by letter and check them against the list.

  2. 2

    Step 2

    Build the frame

    Push the dowels and cam bolts into their holes. Join the sides, top, bottom and dividers, then turn each cam lock a quarter turn.

    Parts

    ABFGJHIEO ×3K ×3CDL ×2P ×4MNQ ×2R ×2

    Hardware

    • ×24 Beech dowel Ø8×35
    • ×39 Chipboard screw 4×30
    • ×18 Cam lock Ø15 + screw-in bolt (drilling distance 24 mm)
  3. 3

    Step 3

    Fix the back

    Lay the frame flat, check it is square by measuring both diagonals, then screw the back panel all round.

    Parts

    ABFGJHIEO ×3K ×3CDL ×2P ×4MNQ ×2R ×2

    Hardware

    • ×16 Chipboard screw 3.5×16
  4. 4

    Step 4

    Fit the legs

    Screw the legs or their plates into the pre-drilled positions, then stand the piece up.

    Hardware

    • ×4 Tapered solid beech table leg 730 mm
    • ×4 Tapered solid beech leg 160 mm
  5. 5

    Step 5

    Build the drawers

    Assemble each drawer box, slide the bottom into its groove and screw on the front. Screw the runners into the cabinet, then slide the drawers in.

    Parts

    ABFGJHIEO ×3K ×3CDL ×2P ×4MNQ ×2R ×2

    Hardware

    • ×3 Ball-bearing drawer slides
  6. 6

    Step 6

    Fix to the wall

    Fix the piece to the wall with the supplied hardware, using plugs suited to your wall. Essential for tall or wall-hung pieces.

    Hardware

    • ×1 Anti-tip wall strap kit (EN 16122)
  7. 7

    Step 7

    Finishing

    Fit the screw and cam covers, the felt pads and the accessories.

    Hardware

    • ×18 Cam cover cap Ø15
    • ×4 Felt pad Ø28
    • ×1 Cable grommet Ø60

A part missing or damaged?

Send us a photo on WhatsApp with your reservation number and we send the replacement part.

WhatsApp